Changing Supply Cables And Vehicle Cables; Disconnecting Cables - Porsche Mobile Charger Connect Manual De Instrucciones

Changing Supply Cables and Vehicle Cables

Changing Supply Cables and
US
Vehicle Cables
FC
DANGER
Risk of serious or fatal injury from electric shock.
e Before changing the supply cable, always unplug
ESM
the supply cable from the electrical socket and
disconnect the vehicle cable from the vehicle
PTB
charge port.
e Only change cables in a dry environment.
e Use only cables approved by Porsche.
TR
f Please see chapter "Items Supplied" on
page 5.
f Please see chapter "Selecting a Supply Cable"
RU
on page 7.
UK
In some countries, e.g. in Norway, Italy, Portugal and
1)
Spain , the supply cable must only be changed by a
qualified electrician. Porsche recommends that you
VIE
use a certified Porsche service partner.
1) Time of printing. Further information is available from
HE
your authorized Porsche dealer or your local electricity
supplier.
AR
JPN
KOR
CHS
CHT
THA
8
Electric shock
Fig. 2: Connections on the control unit
The supply cable A is removed and plugged in at the
top of the control unit.
The vehicle cable B is removed and plugged in at the
bottom of the control unit.

Disconnecting Cables

Fig. 3: Disconnecting cables
b Charging of the high-voltage battery has ended
and the vehicle plug has been removed from the
vehicle charge port.
b The plug has been disconnected from the
electrical socket.
1. Remove screw C using a suitable tool.
2. Lift the lever A.
3. Pull out the plug B until resistance is first felt.
4. Close the lever A.
5. Pull out the plug B fully.