Cleaning
NOTICE
US
e Always keep the door closed.
e Do not place objects on the door or on the charging
FC
dock.
Attaching the Control Unit to the
ESM
Charging Dock
PTB
TR
RU
UK
VIE
HE
AR
Fig. 12: Attaching the control unit
JPN
1. Open the door of the charging dock.
2. Position the bottom of the control unit in the
KOR
locking lugs of the charging dock and engage by
pushing it to the rear.
3. Guide the vehicle cable through the opening A
CHS
and wrap any excess cable around the charging
dock.
CHT
4. Insert the supply cable into the electrical socket.
5. Close the door of the charging dock.
THA
16
Removing the Control Unit from
Damage to the charger
the Charging Dock
Fig. 13: Removing the control unit
1. Open the door of the charging dock.
2. Disconnect the supply cable from the electrical
socket.
3. Unwind the vehicle cable fully from the charging
dock.
4. Detach the control unit from the mount by
pressing the release switch (arrow) and remove.
Cleaning
Check the charger for damage and soiling at regular
intervals and clean it if necessary.
Electric shock, fire
DANGER
Risk of serious or fatal injury due to fire or electric
shock.
e Never immerse the charger or plugs in water or
spray them directly with water (e.g. high-
pressure cleaning equipment or garden hoses).
e Only clean the charger when the control unit has
been fully disconnected from the power grid and
from the vehicle. Use a dry cloth for cleaning.
Disposal
Electrical/electronic devices can be handed in at a
collection point or waste management facility.
e Do not throw electrical/electronic devices in with
household waste.
e Dispose of electrical/electronic devices in
accordance with the applicable environmental
protection regulations.
e If you have questions about disposal, contact an
authorized Porsche dealer.
Further Information
Further information on the charger and the web
application is available under "E-Performance" at the
following web address: https://www.porsche.com