NAMCO PAC-MAN BALL Manual Del Usuario página 102

MGEX IO PCB
1. Disconnect the 5off connectors, disengage the 6off locking supports, and
remove the MGEX IO PCB.
Locking supports
Locking supports
MEM (N) PC board
MGEX IO PC board
2. Re-assemble in reverse order.
When re-assembling, ensure that connectors are fully engaged.
MEM (N) PCB
1. Disengage the 4off locking supports, and remove the MEM (N) PCB.
2. Re-assemble in reverse order.
Connectors
Locking supports
PC board
PC board
Click!
< Installation >
Page 102
Locking supports
Locking supports
Connectors
Locking supports
Long-nosed
pliers
< Removal >