NAMCO PAC-MAN BALL Manual Del Usuario página 126

4. Remove the 2off wing bolts (M4x12), and remove the escalator and hopper
sections.
Escalator section
Wing bolts (M4 x 12)
Hopper section
5. Remove 2off pozi head screws (M4x20), and remove the Hopper.
Coin hopper (L)
Pozi head screws (M4 x 20)
6. Re-assemble in reverse order.
•
When re-assembling, align the escalator mounting bosses with the
holes in the hopper, and secure the hopper with the wing bolts
(M4x12). If the bolts are loose, coins can jam.
•
If the fuse is blown, contact your distributor.
Escalator
section
Escalator
mounting
bosses
Hopper section
Coin box
Pozi head screws (M4 x 20)
Page 126
Holes in hopper
Coin hopper (R)