Adjusting The Coin Entry - NAMCO PAC-MAN BALL Manual Del Usuario

5-5

Adjusting the Coin Entry

1. Remove the Coin Acceptor Assy.
2. Loosen 2off cap screws (M4x6) and 1off button head screw (M4x6), and slide the
Coin Adjuster (L) to adjust the width and height of the coin entry slot.
The dimensions should be set as follows:
Width: Diameter of coin + 0.2 to 0.4mm
Height: Thickness of coin +0.4 to 0.6mm
(see5-4 page47).
Coin adjuster (L)
Button-head screw (M4 x 6)
Cap screw (M4 x 6)
Width
Page 50
Coin adjuster