Playfield Assembly; Replacing The Pusher Motor - NAMCO PAC-MAN BALL Manual Del Usuario

7-3

Playfield Assembly

7-3-1

Replacing the Pusher Motor

• Before replacing the Pusher Motor, remove all coins from the playfield.
1. Switch the power to the game OFF.
2. Remove the maintenance panel from the rear of the cabinet.
3. Disconnect 1off connector, remove 4off pozi head screws (M4x6), and remove
the Pusher Motor complete with Mounting Bracket by sliding them to the side.
Pozi head screws
(M4 x 6)
Pozi head screw
(M4 x 6)
4. Disconnect 1off connector, remove 1off phillips pan head screw (M4x14), and
remove the capacitor.
Capacitor
Connector
Phillips pan-head screw (M4 x 14)
Page 103
Pusher motor bracket
Capacitor
Pozi head screw
(M4 x 6)
Connector