Cleaning The Main Panel And Main Cover - NAMCO PAC-MAN BALL Manual Del Usuario

6-2-7

Cleaning the Main Panel and Main Cover

•
Do not use organic solvents such as thinners, petroleum spirits etc. as
these can damage the machine.
• Do not move the Wiper by Hand. Moving the Wiper can result in machine
malfunctions.
1. Turn OFF and disconnect the power from the game.
2. Remove 1off pozi head screw (M4x6) and remove the Bonus Exit.
3. Remove 6off Pozi head screws (M4x20), 4off pozi head screws (M4x6), 4off
Panel Spacers and remove the Main Panel Cover.
Pozi head screws
(M4 x 20)
Main panel
Main panel cover
4. Wipe clean with a dry soft cloth. If they are excessively dirty, dampen a soft cloth
with a neutral detergent and wipe clean.
5. Re-install in reverse order.
• Do not forget to install the Panel Spacers during re-assembly.
•
Be sure to check that the front and rear sides of the Main Panel are correct
when reinstalling. The upper parts of the opening for the Checker on the
Front side are flat.
Pozi head screws (M4 x 6), panel spacers
Duracon spacers (ø6 x 5, t1.5)
Page 88
Pozi head screws
(M4 x 20)
Main panel
cover
Checker
Front side
Pozi head screw
(M4 x 6)
Pozi head screw
(M4 x 20)
Bonus exit