Top Section - NAMCO PAC-MAN BALL Manual Del Usuario

Top Section

• Do not loosen the nuts within the indicated circle on the following
diagrams. Loosening or adjustment of these items may result in game
failure.
•
Do not use a screwdriver or similar object to remove jammed coins, as
this could cause permanent damge to the assembly.
[Left-hand discharge]
1. Loosen the 8off pozi head screws (M3x10), with flat and spring washers, on
the two Edge Plates.
Do not remove the screws.
2. Widen the gap between the Edge Plates and Back Plate, and push jammed
coins with a finger in the direction of the arrow.
Pozi head screws (M3 x 10)
(with spring washers and flat washers)
3. After coins have been removed, re-assemble in reverse order.
Do not remove screws inside these circles.
Page 83
[Right-hand discharge]
Edge plates
Back plate