Removing The Escalators - NAMCO PAC-MAN BALL Manual Del Usuario

7-8-2

Removing the Escalators

1. Switch the power to the machine OFF.
2. Open the maintenance panel on the rear of the machine.
3. Remove the Escalator Section and Hopper Section.
4. Remove 1off flange socket head screw (M4x10) which is holding the Chute
Hopper B in place.
5. Remove the flange socket head screw (M4x10) which is holding the Upper
Escalator Section in place.
• In this step, be sure to hold the escalator to prevent it from falling.
Escalator for coin hopper (R)
6. Re-assemble in reverse order.
Flange socket (M4 x 10)
Chute hopper holder B
Page 127
(see 7-8-1 page 125)
Escalator for coin hopper (L)