Adjustment Of The Side Edges - NAMCO PAC-MAN BALL Manual Del Usuario

5-1-4

Adjustment of the Side Edges

•
There is normally no need to adjust the side edges In normal operation.
•
The side edges are factory set to the furthest end.
1. Unlock and open the Playfield Door.
2. Remove 1off pozihead screw (M4x6) from each Stage Plate and remove the
Stage Plates L & R.
Stage plate L
3. Loosen the 2off cap screws (M4x20) and move the Side Edges (L), (R)
forwards or backwards for adjustment.
4. Re-assemble in reverse order.
Stage plate R
Pozi head screws (M4 x 6)
Side edge (L) [(R) on opposite side]
Cap screws (M4 x 20)
Page 45
Payout rate decreases
Payout rate increases