Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
7-3-2
Replacing the Pusher Sensor
1.
Switch the power to the game OFF.
2.
Remove the maintenance panel from the rear of the cabinet.
3.
Disconnect 1off connector, remove 1off pozi head screws (M4x14), and remove
the Pusher Sensor.
Pusher sensor
4.
Re-assemble in reverse order.
5.
After re-assembly, conduct a pusher sensor test.
(see Motor Test page 61)
pozi head screw (M4 x 14)
Page 105
Connector
Publicidad
Tabla de contenido
