5-7-3-1
I/O Test
This screen is used for input and output tests.
•
Operations are not accepted while "WAIT!" is displayed in the upper left
corner of the screen.
Sensor Test (Test page 1 of 4)
This checks the Tilt switch and coin sensors for proper operation.
•
Coins can be inserted when this screen is displayed.
1.
Select "I/O TEST" on the menu screen and press the Enter switch. The
following screen is displayed.
NEXT
TILT SW
COIN SENSOR(L1)
COIN SENSOR(L2)
COIN SENSOR(R1)
COIN SENSOR(R2)
EXIT
SELECT SW:CHOOSE
2.
Operate the Select switch Up or Down to select an item. The selected item
is displayed in red.
3.
Press the Enter switch to confirm selection.
4.
After the test for the selected item has been completed, select "EXIT" and
press the Enter switch to return to the I/O Menu screen.
(a) Displays the next page (second page)
(b) Displays the Tilt switch ON/OFF status
(c) Displays the Coin Sensor (L1) ON/OFF status
(d) Displays the Coin Sensor (L2) ON/OFF status
(e) Displays the Coin Sensor (R1) ON/OFF status
(f)
Displays the Coin Sensor (R2) ON/OFF status
I/O TEST
1/4
SENSOR TEST
OFF 0
OFF 0
OFF 0
OFF 0
OFF 0
ENTER SW:ENTER
Page 60
(a)
(b)
(c)
(d)
(e)
(f)