Removing Coin Hopper C - NAMCO PAC-MAN BALL Manual Del Usuario

7-8-3

Removing Coin Hopper C

1. Switch the power to the machine OFF.
2. Open the maintenance panel on the rear of the machine.
3. Remove the Hopper Head A.
4. Disconnect one 4pin connector, and one 3pin connector.
Do not remove the 2pin connector.
* Do not disconnect 2-pin connector.
Connector (3-pin)
5. Remove the 2off wing bolts (M4x12), and remove the escalator and hopper
sections.
Escalator section
Wing bolts (M4 x 12)
Hopper section
Escalator
section
Escalator
mounting
bosses
Hopper section
Page 128
Connector (4-pin)
Fuse holder
Holes in hopper