Lube Oil; Cooling Water - Yanmar 4HLA-HTP Manual Del Usuario

3.1.2 Lube oil

(1) Selection of Engine Lube Oil
Use the following lube oil:
*API Classification..............CD
(Standards of America Petroleum Institute)
*SAE Viscosity.....................15W40
(Standards of Society of Automotive
(2) Selection of Marine Drive Oil
Refer to the operation manual for the marine drive unit for the selection of the proper lube oil.
For MERCRUISER's stern-driven device (BRAVO) use the following lube oil.
●
System Oil
Drive oil
Power steering oil
Power trim oil
®
Quicksilver is registered trademark of Brunswick Corporatoin.
For further more instructions, refer to the maker's manual.
Follow the maker's instructions for the marine gears.
●
(
HSW450A2 (HURTH)(4LHA-HTP/-DTP)
HSW630A1 (HURTH)(4LHA-STP)

3.1.3 Cooling Water

[NOTICE]
Be sure to add Long Life Coolant /Antifreeze (LLC) to cooling fresh water.
In cold seasons, the LLC is especially important.
Without LLC, cooling performance will decrease due to scale and rust in the
cooling water line. Without LLC, cooling water will freeze and expand, breaking
various parts.
Engineering)
Specified lube oil
®
Quicksilver High Performance Gear Lube
Quicksilver ® Power Trim and Steering Fluid or Dexlone-II
®
Quicksilver Power Trim and Steering Fluid
or SAE 10W-30 or 10W-40 engine oil
)
_
24
[NOTICE]
Using other than the specified lube oil
will lead to seizure of parts inside the
engine and gear device, abnormal
wear, and shorten engine life. It will
also effect the starting ability and
power output.
4LHA-HTZP/-DTZP/-STZP
_