Siemens SINUMERIK 840D sl Manual De Puesta En Servicio página 481
Ocultar thumbs
Ver también para SINUMERIK 840D sl:
- Manual de diagnóstico (1564 páginas) ,
- Manual de puesta en marcha (1138 páginas) ,
- Manual del usuario (994 páginas)
Publicidad
01/2006
2.5.17 MMC.INI
[ GLOBAL ]
connectiontype=0
NcddeServiceName=ncdde
ModeWithoutNc=False
ProductCode=MMC
MMCScreenOffTimeInMinutes=5
NcddeMachineName=NCU840D
NcddeDefaultMachineName=NCU840D
NcddeMachineNames=NCU840D
NcddeMachineNamesAdd1=SIM0,SIM1
NcddeStartupFile=ncdde6.nsk
NcddeMmcName=__XXXX__
;ServerVisible = 1
© Siemens AG 2006 All Rights Reserved
SINUMERIK 840D sl/840Di sl/840D/810D Puesta en servicio HMI (IAM) – Edición 01/2006
; connectiontype 0 = ajuste previo: Conexión SINUMERIK 810D/840D
;
1 = conexión con SINUMERIK 840Di
; latency for the screensaver / tiempo de espera para el salvapantallas
; ATTENTION PLEASE FOR USING a SIM1 - MACHINE !!!!!
; for working with a SIMNC arrange the following entries AND
; activate the section [NCDDE_STARTCMD] lower in this mmc.ini
; ATTENTION PLEASE FOR USING a SIM1 - MACHINE !!!!!
; for using M:N function set NcddeMachineName=MachineSwitch
; for working without NC set NcddeMachineName=local
; for working with SIMNC set NcddeMachineName=SIM1
; for connecting to a NC set NcddeMachineName=NCU840D
; for using M:N function set NcddeDefaultMachineName=net:NCU_1
; for working without NC set NcddeDefaultMachineName=local
; for working with SIMNC set NcddeDefaultMachineName=SIM1
; for connecting to a NC set NcddeDefaultMachineName=NCU840D
; for using M:N function set NcddeMachineNames=net,NCU840D
; for working without NC set NcddeMachineNames=
; for working with SIMNC set NcddeMachineNames=SIM1
; for connecting to a NC set NcddeMachineNames=NCU840D
; for connecting to a SIM add NcddeMachineNamesAdd1=SIM0
; for using M:N function set NcddeStartupFile=ncdde6.nsk
; for working without NC set NcddeStartupFile=ncdde202.nsk
; for working with SIMNC set NcddeStartupFile=sim1dde5.nsk
; for connecting to a NC set NcddeStartupFile=ncdde6.nsk
; define a network uniq MMC name (8 characters) here
; Con 1 se visualizan servidores como NCDDE, MBDDE, DH y se pueden
; llevar al primer plano con ALT + TAB para parametrizarlos, en su caso, para
; un Trace (caso de service).
; Para este fin, comentar esta entrada:
Puesta en servicio HMI-Advanced (IM4)
2 Ajustar funciones y parámetros
IM4/2-99
Publicidad
