Frigomat G5 Manual Mantenimiento página 25

4 OPERATIONAL ROUTINES
Le operazioni descritte di seguito devono essere effettuate quotidianamente.
4.1 Daily Closing
This procedure must be performed once daily, before the night
closing.
Wash your hands well and/or wear disposable gloves.
Remove the lift and proceed with their cleaning and sanitizing.
Carefully clean the upper surface of the machine (top) with disposable paper
previously soaked in detergent / sanitizing liquid, taking care to avoid any
contact of the sanitizer with the food product contained inside the jars.
Be sure to carry out the operations described in a sufficiently short time to
prevent the temperature of the product contained in the tub from exceeding
the 4 °C threshold (39 °F).
Carefully reassemble the
parts previously
disassembled and sanitized.
Press the NIGHT
PRESERVATION "CN" key
(fig.III/15) to switch the
machine from the production
mode to the stand-by mode.
In this mode the product in
the tubs is kept at a
temperature close to 0°C
(32°F).
Check that the display is showing code "C_N" to confirm the switch.
To return to operating mode,
press the NIGHT
PRESERVATION "CN" key
again (fig.III/16).
4.2 Daily Opening
The following procedure must be performed at the beginning of each work
session, at the end of a long administration break with the machine in
NIGHT PRESERVATION "CN" mode.
Check that there are no alarms shown on the display.
Check that the displays do not show the message "PWR", indicating that
during the conservation phase there has been an interruption of power
supply (black out): in this case the product could be contaminated and no
longer suitable for administration. In this case, the product must be
eliminated and the machine cleaned and sanitized.
Check that the mixture conservation status in the tub is correct. In case of
signs of separation, it is advisable to start the machine in agitation for a few
moments until the product is completely mixed.
Check that the machine has remained clean, not contaminated by dust,
impurities or insects.
Press NIGHT PRESERVATION - CN key and check that all displays no
longer show the message "CN".
Wait for the batch time and check that the consistency of the product is
correct.
G5 G10
FRIGOMAT
fig.III/15
fig.III/16
M04.37562 R.2021.10.23 8
EN