Frigomat G5 Manual Mantenimiento página 85

G10 - DIMENSIONAL DRAWINGS
width : 490 mm
* mounted on standard feet h=25mm (1")
TECHNICAL SPECIFICATIONS
model
G10
** A = Air
Electrical
One dedicated electrical connection is required. See the Electrical
chart for the proper electrical requirements. Manufactured to be
cord connected (Schuko plug). Consult your local Frigomat distri-
butor for specifications as local codes allow.
Freezing Cylinder
1 x 6 lt. (6.3 quart).
Beater Motor
1 x 185 W (1/4 HP).
Refrigeration System
1 x ~812 W R290 (1x 140g)
(@ - 23.3°C evap. / + 45°C cond.)
The declared production capacities are only indicative and may vary depending upon the conditions of operation and the products used.
For exact electrical information, always refer to the data label of the unit.
Specification subject to change without notice.
Frigomat S.r.l.
Via 1°Maggio, 28 - 26862 Guardamiglio (LO), ITALY
+39 0377 415011 frigomat@frigomat.com
G5 - DATA SHEET - R2021.12.20
G5 G10
FRIGOMAT
depth : 508 mm
cooling
production tank
**
kg/h n. x lt.
10 1 x 2,5 A
M04.37562 R.2021.10.23
height * : 425 mm
power supply - consumption
V Hz Ph - A kW
230V 50Hz 1 - 6.5A 1,0 kW
Air Cooled
Minimum 100 mm (4") on right and rear sides and 300 mm (12") on
left. Minimum air clearances must be met to ensure adequate air
flow for optimum performance.
Sound pressure level
< 68 dB (A)
Accessories
-
www.frigomat.com
iii
3
crated volume : 0,3 m
V Hz Ph - A kW
115V 60Hz 1 - 13.0A 1,0kW
IT
EN
FR
DE
ES
max
net crated
fuse
weight weight
size
kg kg
56 70
-