Publicidad
Idiomas disponibles
Idiomas disponibles
for at least 5 seconds: an acoustic warning ("beep") is emitted
to confirm that the recipe has been deleted.
Import/Export with "USB flash drive" ("CHEF" recipe book) )
Through the "USB port" present in the lower hinge of the door,
it is possible to "Import" new recipes into the "CHEF recipe
book", or "Export" the recipes from the same recipe book con-
taining them, using a "USB flash drive".
IMPORT:
• After connecting the "USB flash drive" (with the new reci-
pes) to the relative "USB port", touch the symbol
(no 26 fig. 1) for at least 2 seconds: you will hear an
acoustic warning ("beep") confirming the successful "im-
port" (the symbol becomes
within the "CHEF" recipe book, in the first "recipe num-
bers" free from stored programs (recipes).
IMPORTANT: If the "USB flash drive" is not connected or de-
tected, the symbol
does not appear.
EXPORT:
• After connecting the "USB flash drive" ("empty") to its "USB
port", tap on the symbols
recipe book the "recipe number" you wish to export to the "USB
flash drive". It is also possible to export all the recipes in the
recipe book at the same time: touch the symbols
until the word "aLL" appears instead of the "3 digits" that
make up the "recipe number". In both cases to confirm
the successful "export" (the symbol becomes
the symbol
for at least 5 seconds: you will hear the
acoustic confirmation warning ("beep").
IMPORTANT: If the "USB flash drive" is not connected or de-
tected, the symbol
does not appear.
COOLING setting
• The COOLING function can be activated by touching the sym-
bol
(no 3 fig. 1) and the symbol
door after finishing a cooking cycle. During cooling (the sym-
bol becomes
) the "3 digits" that on the display indicate
the temperature parameter, show in real time the value inside
the cooking chamber.
• The COOLING function can only be activated (the symbol
symbol appears on the display) when the temperature is at
least 50°C inside the cooking chamber.
• The function may be disabled at any time by touching the
symbol
; otherwise, it is disabled automatically when the
temperature inside the cooking chamber reaches 40°C.
WARNING: During operation, with the door open, do not re-
move the fan cover; do not touch the moving fans and resis-
tors which are still hot.
HACCP function
The purpose of the HACCP function is to record the operational
data of the cooking cycles performed, constantly monitoring
their progress. The HACCP data is recorded in a "USB flash
drive" that must be connected to the "USB port" of the oven: the
symbol
(no 5 fig. 1) appears on the display.
) of all the new recipes
or
; select from the "CHEF"
and
), touch
opening the oven
HACCP function activation:
After connecting the "USB flash drive" to the "USB port" of the
oven, touch the symbol
becomes
): the operating parameters of the cooking cycle
(manual or programmed) are recorded in a "file" inside the
"USB flash drive".
Displaying HACCP data (on PC):
To display the operating parameters of a finished cooking cycle
on a PC, simply remove the "USB flash drive" from the "USB
port" of the oven (the symbol
and insert it into the "USB port" of the PC. The HACCP "files"
inside the "USB flash drive", can be "opened" and displayed
with the same procedure used for any "file".
IMPORTANT: All the data concerning the cooking cycles carried
out on the same day are contained in the same HACCP "file".
If more than one cooking cycle is carried out, but on different
days, they are recorded in different HACCP "files": identified by
the date of the day on which the cooking cycle was carried out.
Automatic washing (optional)
Touch the symbol
(no 4 fig. 1): the display shows the PA-
RAMETER SCREEN concerning the "number of steps" where,
instead of the "2 digits", by touching the symbols
you can select (within 5 seconds) the desired washing program:
the corresponding "washing time" is also shown. To confirm it
(within 5 seconds) touch the symbol
) and then to activate it touch symbol
play the "wash time" parameter (hours/minutes) is activated
in "countdown" mode. The following washing programs can be
selected:
1. L1 Eco Wash (44 minutes)
2. L2 Normal Wash (1h18 minutes)
3. L3 Intensive Wash (1h 52 minutes)
4. L4 Rinse (11 minutes)
5. CP Pump Loading (2 minutes)
• When the washing program ends regularly, a 10-second
acoustic warning ("beep") is emitted and the PARAMETER
SCREEN flashes on the display, showing the parameters of
the finished washing program in green.
• If a washing program ("L1"/ "L2"/ "L3") is voluntarily inter-
rupted by touching the symbol
("L4") is automatically activated and cannot be interrupted,
but ends regularly. The same thing happens in the event of a
"blackout" during the washing cycle, when power is restored
to the oven, it automatically performs the rinsing cycle. The
"Pump Loading" ("CP") program once activated cannot be
interrupted and ends regularly. The "Rinse" ("L4") program
can be interrupted at any time by tapping on the symbol
• When the temperature in the cooking chamber is above 90°C,
washing cannot be activated and the "E 10" alarm appears
on the display in orange. To reset the alarm touch the sym-
bol
: the display indicates the "Stand-by" mode (chapter
"STAND-BY mode" on page 7). To reactivate the oven, touch
the symbol
.
IMPORTANT: The first time you use automatic washing and
every time you change the detergent tank, it is advisable to use
the "CP" program. This way the air inside the peristaltic pump
and the connection pipes is removed, ensuring the correct
functionality of the system. If the "CP" program is repeated 2
, to active the function (the symbol
disappears from the display)
or
(symbol becomes
. On the dis-
, the "Rinse" program
EN
.
11
Publicidad
