Note:
Do not use lotion or cream on the test site. Avoid moles, veins, bones,
and tendons. Bruising may occur at the test site. If you get a bruise, consider
selecting another site.
2. Check the test strip expiration date. Do not use expired test strips as they may
give inaccurate results.
3. Open the foil test strip packet at the notch and tear down to remove the test
strip. Use the test strip immediately after removing from the foil packet.
4. Insert the test strip with the three black lines at the end facing up. Push the
strip in until it stops.
Note:
The Reader's built-in meter turns o! after 2 minutes of inactivity.
5. Use your lancing device to obtain a blood drop and apply blood to the white
ART46983-001_rev-A 24-Aug-2022 2:30pm