Freestyle Libre 2 Manual Del Usuario página 86

ART46983-001_rev-A 24-Aug-2022 2:30pm
High Glucose Alarm: Notifies you if your glucose rises above the level you set.
The alarm does not include your glucose reading, so you need to scan your
Sensor to check your glucose. Swipe or tap to dismiss the alarm and check your
glucose. You will only receive one alarm per high glucose episode.
Signal Loss Alarm: Notifies you if your Sensor has not communicated with the
App for 20 minutes and you are not receiving Urgent Low, Low, or High Glucose
Alarms. Signal loss could be caused by the Sensor being too far away from your
phone (over 20 feet) or another issue such as an error or problem with your
Sensor. Swipe or tap to dismiss the alarm.
Replace Sensor Alarm (iPhone only): Notifies you if your Sensor has ended.
You will not receive glucose alarms after this time unless you start a new Sensor.
Remove your Sensor and start a new Sensor to check your glucose. Swipe or tap
to dismiss the alarm.
Note: For all of the above alarms: if you ignore an alarm, you will receive it again
in 5 minutes if the condition still exists. Only your most recent alarms will display
on your screen.
Sensor Ended Alarm: Notifies you if your Sensor has ended. You will not receive
glucose alarms after this time unless you start a new Sensor. Remove your
Sensor and start a new Sensor to check your glucose. Swipe or tap to dismiss the
alarm.