Freestyle Libre 2 Manual Del Usuario página 95

2. Discard the used Sensor following directions from your health care
professional. See
new Sensor, follow the instructions in
Sensor. If you removed your last Sensor before it ended, you will be prompted
to confirm that you would like to start a new Sensor when you first scan it.
Replacing Your Sensor
Your Sensor automatically stops working after the wear duration and must be
replaced. You should also replace your Sensor if you notice any irritation or
discomfort at the application site or if your device reports a problem with the
Sensor currently in use. Taking action early can keep small problems from
turning into larger ones.
CAUTION: If the Sensor is becoming loose or if the Sensor tip is coming out of
your skin, you may get no readings or unreliable readings, which may not match
how you feel. Check to make sure your Sensor has not come loose. If it has come
loose, remove it, apply a new one, and contact Customer Service. Customer
Service is available at 1-855-632-8658 7 Days a Week from 8AM to 8PM Eastern
Time; excluding holidays.
Using Reminders
You can create single or repeating reminders to help you remember things like
checking your glucose or taking insulin. You can also set a reminder to remind
you to check your alarm settings if you have turned o! any of your alarms
temporarily.
Using Reminders in the Reader
Maintenance and Disposal. When you are ready to apply a
Applying Your Sensor
ART46983-001_rev-A 24-Aug-2022 2:30pm
and Starting Your