Freestyle Libre 2 Manual Del Usuario página 8

ART46983-001_rev-A 24-Aug-2022 2:30pm
Sensor insert and help prevent it from falling o! early.
The Sensor can be worn for up to the wear duration specified by your Sensor
insert. Remember to always have your next Sensor available before your
current one ends so you can keep getting your glucose readings.
You must scan the Sensor to get your real-time current glucose level as both
the Reader and App will not provide this information without a scan.
In the event that your Sensor stops working and you do not have another
Sensor readily available, you must use an alternate method to measure your
glucose levels and inform your treatment decisions.
The System is designed to detect certain conditions which may occur where
the Sensor is not working as intended and shut it o!, telling you to replace
your Sensor. This may occur if the Sensor gets knocked o! from the skin or if
the System detects that the Sensor may not be performing as intended.
Contact Customer Service if you receive a Replace Sensor message before the
end of the wear duration specified by your Sensor insert. Customer Service is
available at 1-855-632-8658 7 Days a Week from 8AM to 8PM Eastern Time;
excluding holidays.
Some individuals may be sensitive to the adhesive that keeps the Sensor
attached to the skin. If you notice significant skin irritation around or under
your Sensor, remove the Sensor and stop using the System. Contact your
health care professional before continuing to use the System.
Intense exercise may cause your Sensor to loosen due to sweat or movement
of the Sensor. If the Sensor is becoming loose or if the Sensor tip is coming
out of your skin, you may get no readings or unreliable low readings. Remove
and replace your Sensor if it starts to loosen and follow the instructions to
select an appropriate application site. Do not attempt to reinsert the Sensor.
Contact Customer Service if your Sensor becomes loose or falls o! before the
end of the wear period. Customer Service is available at 1-855-632-8658 7
Days a Week from 8AM to 8PM Eastern Time; excluding holidays.
Do not reuse Sensors. The Sensor and Sensor Applicator are designed for
single use. Reuse may result in no glucose readings and infection. Not suitable
for re-sterilization. Further exposure to irradiation may cause unreliable low
results.
If a Sensor breaks inside your body, call your health care professional.