Freestyle Libre 2 Manual Del Usuario página 11

The Sensor should be removed prior to exposing it to an X-ray machine. The
e!ect of X-rays on the performance of the System has not been evaluated. The
exposure may damage the Sensor and may impact proper function of the
device to detect trends and track patterns in glucose values during the wear
period.
When to remove the Sensor:
If the Sensor is becoming loose or if the Sensor tip is coming out of your skin,
you may get no readings or unreliable readings, which may not match how
you feel. Check to make sure your Sensor has not come loose. If it has come
loose, remove it, apply a new one, and contact Customer Service.
If you believe your glucose readings are not correct or are inconsistent with
how you feel, perform a blood glucose test on your finger to confirm your
glucose. If the problem continues, remove the current Sensor, apply a new
one, and contact Customer Service. Customer Service is available at 1-855-
632-8658 7 Days a Week from 8AM to 8PM Eastern Time; excluding holidays.
What to know about the Reader's Built-in Meter:
The FreeStyle Libre 2 Reader has a built-in blood glucose meter that is
designed to be used only with FreeStyle Precision Neo blood glucose test
strips and MediSense Glucose and Ketone Control Solution. Using other test
strips with the Reader's built-in meter will produce an error or cause the
Reader's built-in meter to not turn on or start a test. The Reader's built-in
meter does not have ketone testing functionality.
The Reader's built-in meter is not for use on people who are dehydrated,
hypotensive, in shock, or for individuals in hyperglycemic-hyperosmolar state,
with or without ketosis.
The Reader's built-in meter is not for use on neonates, in critically-ill patients,
or for diagnosis or screening of diabetes.
See Using the Reader's Built-in Meter
the use of the Reader's built-in meter.
What to know about charging your Reader:
Be sure to select a location for charging that allows the power adapter to be
for additional important information on
ART46983-001_rev-A 24-Aug-2022 2:30pm