Freestyle Libre 2 Manual Del Usuario página 27

2. Wash application site using a plain soap, dry, and then clean with an alcohol
wipe. This will help remove any oily residue that may prevent the Sensor from
sticking properly. Allow site to air dry before proceeding.
Note: The area MUST be clean and dry following these instructions, or the
Sensor may not stay on for the full wear duration specified by your Sensor
insert.
3. Open the Sensor Pack by peeling the lid o! completely. Unscrew the cap from
the Sensor Applicator and set the cap aside.
CAUTION: Do NOT use if the Sensor Pack or Sensor Applicator seem to be
damaged or already opened. Do NOT use if past expiration date.
ART46983-001_rev-A 24-Aug-2022 2:30pm