Checking Your Glucose with the Reader
1. Turn the Reader on by pressing the Home Button or touch Check Glucose
from the Home screen.
OR
2. Hold the Reader within 1.5 inches (4 cm) of your Sensor to scan it. Your Sensor
wirelessly sends glucose readings to the Reader. If sounds are turned on, the
Reader beeps when the Sensor has been successfully scanned.
Note:
If the Sensor is not successfully scanned within 15 seconds, the Reader
displays a prompt to scan the Sensor again. Touch OK to return to the Home
screen and touch Check Glucose to scan your Sensor.
ART46983-001_rev-A 24-Aug-2022 2:30pm