Battery Charger Information; Information On Proximity To Certain Areas - Ottobock C-Leg 3C98-3 Instrucciones De Uso

4.5 Battery charger information

NOTICE
Penetration of dirt and humidity into the product
Lack of proper charging functionality due to malfunction.
Ensure that neither solid particles nor liquids can penetrate into the product.
►
NOTICE
Mechanical stress on the power supply/battery charger
Lack of proper charging functionality due to malfunction.
► Do not subject the power supply/battery charger to mechanical vibrations or impacts.
► Check the power supply/battery charger for visible damage before each use.
NOTICE
Operating the power supply unit/charger outside of the permissible temperature range
Lack of proper charging functionality due to malfunction.
Only use the power supply unit/charger for charging within the allowable temperature range.
►
The section "Technical data" contains information on the allowable temperature range (see
Page 78).
NOTICE
Independent changes or modifications carried out to the battery charger
Lack of proper charging functionality due to malfunction.
► Have any changes or modifications carried out only by Ottobock authorised, qualified per­
sonnel.

4.6 Information on Proximity to Certain Areas

CAUTION
Insufficient distance to HF communication devices (e.g. mobile phones, Bluetooth
devices, WiFi devices)
Falling due to unexpected behaviour of the product caused by interference with internal data
communication.
► Therefore, keeping a minimum distance of 30 cm to HF communication devices is recom­
mended.
CAUTION
Proximity to sources of strong magnetic or electrical interference (e.g. theft prevention
systems, metal detectors)
Falling due to unexpected behaviour of the product caused by interference with internal data
communication.
► Avoid remaining in the vicinity of visible or concealed theft prevention systems at the
entrance/exit of stores, metal detectors/body scanners for people (e.g. in airports) or other
sources of strong magnetic and electrical interference (e.g. high-voltage lines, transmitters,
transformer stations...).
If this cannot be avoided, ensure at least that you have a safeguard when walking or stand­
ing (e.g. a handrail or the support of another person).
► When walking through theft prevention systems, body scanners or metal detectors, watch
for unexpected changes in the damping behaviour of the product.
55