Personnel Qualifications; Danger In The Event Of Non-Observance Of The Safety Instructions; Safety Instructions For The Operator; Safety Instructions For Inspection And Installation Work - salmson SIE BV Serie Instalacion Y Puesta En Servicio

English
2.2

Personnel qualifications

2.3 Danger in the event of non-
observance of the safety
instructions
2.4

Safety instructions for the operator

2.5 Safety instructions for inspection
and installation work
2.6 Unauthorised modification and
manufacture of spare parts
2.7

Improper use

3

Transport and interim storage

3.1

Shipping

Transport inspection
Storage
32
The installation, maintenance and repair personnel must have the
necessary qualifications for this work.
Non-observance of the safety instructions can result in risk of injury
to persons and damage to product/unit. Non-observance of the safety
instructions can result in the loss of any claims to damages.
In detail, non-observance can, for example, result in the following
risks:
• Failure of important product/unit functions
• Failure of required maintenance and repair procedures
• Danger to persons from electrical, mechanical and bacteriological
influences
• Property damage
The existing directives for accident prevention must be adhered to.
Danger from electrical current must be eliminated. Local directives or
general directives [e.g. IEC, VDE etc.] and local power supply compa-
nies must be adhered to.
The operator must ensure that all inspection and installation work is
carried out by authorised and qualified personnel, who are sufficiently
informed from their own detailed study of the operating instructions.
Work on the product/unit should only be carried out when it has been
brought to a standstill.
Modifications to the product/unit are only permissible after consulta-
tion with the manufacturer. Original spare parts and accessories
authorised by the manufacturer ensure safety. The use of other parts
can nullify the liability from the results of their usage.
The operating reliability of the supplied product/unit is only guaran-
teed if the product/unit is used as intended in accordance with Sec-
tion 4 of the operating instructions. The limit values must on no
account fall under or exceed those specified in the catalogue/data
sheet.
The pump is lashed to a pallet ex works and is protected against dirt
and moisture.
On arrival, inspect the pump immediately for any transport damage. If
damage is detected, the necessary steps involving the forwarding
agent must be taken within the specified period.
Before installation, the pump must be kept dry, frost-free and pro-
tected from mechanical damage.
CAUTION! Risk of damage due to incorrect packaging!
If the pump is transported again at a later time, it must be packaged
so that it cannot be damaged during transport.
• Use the original packaging for this, or choose equivalent packag-
ing.
Pompes Salmson 03/2011