Operations - John Bean QUADRIGA 1000 Manual Del Operador

68

Operations

5 . 0 O p e r a t i o n s - G e n e r a l
precautions
The Super Automatic tire changer is designed for use
with the wheels mentioned previously. It operates
according to preset parameters that guarantee
the smooth running and perfect repeatability of all
operations.
For the operations to be perfectly successful the
operator must set the data correctly and supervise the
entire work cycle.
Automatic operation is therefore the main feature of
the tire changer and even if it is possible to mount
or demount the tires in manual mode, the machine
guarantees maximum success only if the Automatic
Mode is used.
WARNING:
USING THE MACHINE IN "MANUAL MODE" OR
INCORRECTLY MAY DAMAGE THE TIRES, RIMS
AND THE MACHINE ITSELF.
WARNING:
USING THE MACHINE IN "MANUAL MODE"
MEANS THAT THE OPERATOR MUST TAKE FULL
RESPONSIBILITY FOR ALL OPERATIONS.
CAUTION:
BEFORE MOUNTING A TIRE ON A RIM ENSURE
THE FOLLOWING RULES ARE OBSERVED:
A- THE RIM MUST BE CLEAN AND IN GOOD
CONDITION: IF NECESSARY CLEAN AFTER
REMOVING ALL WHEEL-WEIGHTS INCLUDING
'TAPE WEIGHTS' INSIDE THE RIM.
B- THE TIRE MUST BE CLEAN AND DRY, WITH
NO DAMAGE TO THE BEAD AND THE CASING.
C- REPLACE THE RUBBER VALVE STEM WITH
A NEW ONE OR REPLACE THE 'O' RING IF THE
VALVE STEM IS MADE OF METAL.
D- LUBRICATION IS NECESSARY FOR CORRECT
MOUNTING OF THE TIRE AND PROPER
CENTERING. USE ONLY AN APPROVED
LUBRICANT FOR TIRES.
E- MAKE SURE THE TIRE IS THE CORRECT SIZE
FOR THE RIM.
Operator's Manual QUADRIGA 1000/BB