Sun ECK TWIN 12 Manual De Instrucciones página 29

QUICKSETUP
NOTE : The QUICKSETUP is shown after the activation of the machine
The first time the machine is used, a quicksetup guide appears: the operator is guided through
the steps described at the start of the PRELIMINARY OPERATIONS section. The quicksetup
can also be found in the SETUP MENU, select QUICKSETUP. The following screen is
displayed:
Press ENTER to proceed with QUICKSETUP, the user will be guided through the following
steps:
• Language
• Measure units
• License plate recording
• Date and time
• Setup header print
• Unlock tank
• Oil settings
• Vacuum settings
• Leak check test
Follow the instructions displayed. At the end of the procedure, press ENTER to print a
summary report of the guided procedure. Press ESC to exit.
NOTE: If the guided procedure is not completed, it will be displayed again the next time the
machine is switched on.
NOTE: To display the QUICKSETUP at any time, select from the menu of the same name
under SETUP.
INSTRUCTIONS MANUAL
QUICKSETUP
QUICKSETUP
Press ENTER to continue
Press ESC to exit
-28-
DD/MM/YY XX:XX PM
ESC
ENTER