Sun ECK TWIN 12 Manual De Instrucciones página 36

The machine will recover the residual refrigerant into the service hoses, then the following
screen will be displayed:
You are asked to enter the vehicle's PLATE, the FRAME NUMBER, the KM/Miles and the
Operator Code. Press ENTER.
A summary of the amount of gas recovered, oil recovered, minutes of the vacuum phase and
the amount of gas charged is displayed. Press the symbol
Automatic procedure completed successfully, press ENTER to return to the main page.
NOTE: The automatic procedure may be run even if the A/C system is empty. In this case the
machine will begin with the vacuum phase.
INSTRUCTIONS MANUAL
EMPTY HOSES
EMPTY HOSES
Hoses pressure
Plate:
-
VIN:
-
Miles:
-
Operator code:
123456
CHARGE AMOUNT
END of procedure
Gas recovered: 41 g
Oil recovered:
Vacuum time:
Oil injected:
UV injected:
Gas charged:
Press ENTER to continue
-35-
DD/MM/YY XX:XX PM
4.0bar
STOP
DD/MM/YY XX:XX PM
ENTER
DATABASE
ENTER
DD/MM/YY XX:XX PM
0 ml
2 min
xx ml
xx ml
200 g
ENTER
for printing (Optional)