Sun ECK TWIN 12 Manual De Instrucciones página 35

If the UV function is installed, the quantity of UV set by the operator will be automatically
reintegrated.
When completed, the system will go on to charging with the preset quantity of refrigerant.
Then the following screen will be displayed.
Disconnect HP coupling. Start A/C system with LP coupling connected, press ENTER
The A/C system will recover the refrigerant into the service hoses, then the following screen will
be displayed:
Disconnect LP coupling from A/C system, then press ENTER to continue:
INSTRUCTIONS MANUAL
OIL INJECTION
CHARGE
Gas charged:
Tank Pressure
A/C pressure
Tank Temperature
Disconnect HP coupling Start A/C system with LP
coupling connected end press ENTER
Disconnect LP coupling from A/C system end press ENTER
-34-
DD/MM/YY XX:XX PM
STOP
UV INJECTION
0 ml/ 0%
DD/MM/YY XX:XX PM
86g / 100 g
6.6 bar
STOP
2.9 bar
25.5 °C
DD/MM/YY XX:XX PM
ENTER
DD/MM/YY XX:XX PM
ENTER