Melchioni Family GIOIA Manual De Instrucciones página 29

During cooking: The indicator (12) lights up in sequence indicating that the process is
underway: if the water in the tank finishes during a program that includes steam, the
excessive cooling in the cooking chamber, potentially affecting the final result. If filling
is not carried out within two minutes, the appliance will switch off and will need to be
reprogrammed.
During the recipe, the display shows the remaining minutes until the end of the recipe,
alternated with the set temperature. The following procedures can also be performed
by tapping the corresponding icon:
Icon
Switches the display and selection of the set temperature with that of the
remaining time: these two values are also automatically alternated on the
display during cooking
Switches the internal lighting on and off
Pauses the recipe, stopping cooking but maintaining the previously set
parameters. The indication (12) stops and the remaining time stops
counting down. Tapping icon (10) again restarts the recipe
Increases the remaining recipe time by one minute or the set
temperature by 5 °C for every tap. The temperature can only be adjusted
during the air frying stages. The increased time or temperature are
immediately displayed
Reduces the remaining recipe time by one minute or the set temperature
by 5 °C for every tap. The temperature can only be adjusted during the air
frying stages. The reduced time or temperature are immediately
displayed
Stops the recipe and starts the final cooling process
Stirring: Certain recipes require one or more stirrings during preparation to ensure
more even cooking: to stir, the drawer can be removed from its seat and the contents
shaken, taking great care to avoid overflowing and spilling, which are potentially
dangerous given the high temperature. The drawer can also be placed on an inert
indicator (31) will start flashing on the display and
several audible signals will be emitted. Fill the tank as
described in Chap. 4 points 10 and 11, paying
attention to the possibly high temperature of the
surfaces and remaining water. Once the tank is back
in its seat, cooking automatically resumes and the
program is completed. The filling procedure should
be carried out as quickly as possible to prevent
Function
28