Hidden Weights Placement - John Bean B 600 Manual Del Operador

55g.
A
75g.
78
5-36
B
5-37
Operation

5.10.2 Hidden weights placement

How to fi t stick-on weights on the left side of
the rim channel
— Clean the application point before applying the
stick-on weight.
— Fit stick-on weights on the left side of the rim
F
channel ( 5.9).
Application of hidden stick-on weights
The measured values and the positioning arrows for
the two correction positions behind the spokes (Figure
5-36) are given on the right of the Indications Field.
— Turn the wheel to move one of the split imbalances,
on the right side (A, Figure 5-37) into the
compensation position (green arrows), then lock
the wheel with the brake pedal.
— Clean the application point before attaching the
stick-on weight.
— Apply the correction weight at the indicated point
(in the example 55 grams, A, Figure 5-37).
— Turn the wheel to reach the remaining split weights
compensation position on the right side, then lock
the wheel with the brake pedal.
— After having cleaned the area concerned, apply
behind the second spoke the weight of the value
indicated (in the example 5 grams, B, Figure 5-37).
Note:
Applying split weights does not involve priorities.
The operator can choose which to apply fi rst.