John Bean B340 Manual Do Operador página 104

26
104
5-73
5-74
5-61
5-75
Operation
Message E9
Message E9 means that at least one error has occurred
during the optimisation cycle (System messages
7.1).
— Abort the optimisation program by pressing the
STOP key and, if desired, start optimisation once
again.
Fig. 5-73 MINIMISATION "Un.12"
— Clamp the wheel.
— Position the valve so that it is exactly perpendicular
to and above the chuck.
— Confi rm the valve position by pressing menu key
26.
The MINIMISATION "Un.13" is displayed (Fig. 5-74).
Figure 5-74 MINIMISATION "Un.13"
START is displayed on the screen
— Perform the wheel measuring run.
A measuring run is performed.
The BALANCING screen appears (Fig. 5-61).
Finish weight Minimisation
Figure 5-61 BALANCING
— Balance the wheel according to the readings.
If the silent wheel running conditions cannot be
improved on, the following message is displayed:
Fig. 5-75
H0 Silent wheel running conditions cannot be
improved by optimisation.
F