John Bean B340 Manual Do Operador página 94

26
29
26
94
5-53b
5-54
26
5-55
5-56
Operation
Figure 5-53b OPTIMISATION "OP.10", outside
— Rotate the wheel into marking position following the
arrows.
— In this position make a double mark on the tyre
outer side exactly above the chuck.
— Confi rm by pressing menu key 26.
The OPTIMISATION "OP.11" screen is displayed (Fig.
5-55).
Figure 5-54 OPTIMISATION "OP.10", inside
If the tyre cannot be turned over on the rim (e.g.:
Asymmetrical and Directional),
press the menu key 29, then
—
continue as shown on screen OPTIMISATION
—
"OP.10" (Fig. 5-53b).
If the tyre can be turned over on the rim;
— Rotate the wheel into marking position following the
arrows.
— In this position make a double mark on the inside
of the tyre, exactly above the chuck.
— Turn the tyre over on the rim (tyre changer).
— Confi rm by pressing menu key 26.
The OPTIMISATION "OP.11" screen is displayed (Fig.
5-55).
Figure 5-55 OPTIMISATION "OP.11"
— Push the tyre on the rim until the double mark
coincides with the valve (use tyre changer).
— Confi rm by pressing menu key 26.
The OPTIMISATION "OP.12" screen is displayed
5-56).
Fig.
(