John Bean B340 Manual Do Operador página 92

26
1
2
1
92
5-51
5-52
16 29
5-52a
5-53
5-53a
Operation
The OPTIMISATION "OP.9" screen is displayed
5-51).
Figure 5-51 OPTIMISATION "OP.9"
START is displayed on the screen
— Perform the wheel measuring run.
A measuring run is performed.
The OPTIMISATION "OP.10" screen is displayed,
outside (Fig. 5-52) or the OPTIMISATION "OP.10"
screen appears, inside (Fig. 5-53).
With indication H0
Optimum condition has been achieved and cannot be
improved.
— Continue as shown on screen BALANCING (Fig.
5-51).
Indication H2
a)
Silent wheel running conditions cannot be improved.
— Press ESC or STOP (1,16, Fig.5-52a) to quit
Optimisation.
b)
However, it is possible to readjust the tyre with rim to
obtain a considerable reduction of weights (i.e. smaller
weights) without having an adverse effect on wheel
running noise.
— Press MINIMISATION (29, Fig.5-52a)
Splitting faults
At this stage of the program the faults index is available
(Fig.5-53a).
— Press XXX.
Two values appear, indicating how the total wheel
unbalance is split as a percentage between the
rim and the tyre;
Unbalance percentage attributable to the Rim (1).
Unbalance percentage attributable to the Tyre (2).
— Continue as shown on screen OPTIMISATION
"OP.10" (Fig. 5-53b).
Fig.
(