John Bean B340 Manual Do Operador página 136

4
A P
4
136
7-4
B Q
7-5
User Code
Stop of the wheel when the wheel guard is lifted
during the measuring run
.
(Fig 7-4) Select; (4), (A), (P),
Disabled
THE WHEEL ROTATES WHEN THE WHEEL GUARD
IS OPEN.
MAKE SURE THAT THE WHEEL IS NOT BLOCKED
BY A TOOL OR SIMILAR ITEM.
WEAR SAFETY GOGGLES AND TIGHTLY FITTING
WORKING CLOTHES.
Enabled(*)
After the confi rmation, this operating mode can
be acquired in the permanent memory (Fig. 7-6).
Number of revolutions per measuring run - 5 to 20
revolutions possible, factory–set to 10*
.
(Fig 7-5) Select; (4), (B), (Q), (Q1),
Rotate the shaft to change the value.
—
Type on the value set.
—
S
Warning
Reducing the number of measurement revolutions will
reduce the accuracy of measurement.
After the confi rmation, this operating mode can
be acquired in the permanent memory (Fig. 7-6).
Q1
Selecting the limit (threshold) value for suppression
S1 of minor unbalance readings in grams, or ounces.
.
(Fig 7-5) Select; (4), (B), (S), (S1),
Ounces:
Grams:
Range 0.12 to 0.71 oz
Range 3.5 to 20 g
Factory-adjusted to 0.18* oz
Factory-adjusted value is 3.5 g
Select another limit, e. g.: 0.50 oz
Threshold value display, e.g.: 3.5 g
• Select Code (S, Fig. 7-5)
Select another limit.
—
• Set the value 0.50
• Type on the value set
Type on the value set.
—
Grams:
Ounces:
Range 3.50 to 20.0 g
Range 0.12 to 0.71 oz
Factory-adjusted to 5.0* g
Factory-adjusted value is 0.12 oz
Select another limit, e. g.: 5.50 g
Threshold value display, e.g.: 0.12 oz
• Select Code (S, Fig. 7-5)
Select another value, e.g.: 0.2 oz
—
• Set the value 5.50
Type on the value set.
—
• Type on the value set
After the confi rmation, this operating mode can
be acquired in the permanent memory (Fig. 7-6).
* = Factory confi guration
= Stop deactivated
= Stop activated