Device Menu - Ecolab Versatronic Instrucciones De Servicio

10

Device menu

The operation depends on the user rights. General and settings options
vary depending on the rights of the user.
For an overview of the default users and their user rights, see the section
on user management.
See
The Device menu contains submenus for setting and configuring all device functions.
To call one of the submenus in the device menu, tap the corresponding entry.
Go to the device menu by tapping the Device Menu button at user level.
Ä Chapter 9.1.3 'Controls' on page 85.
See
Fig. 51: Device menu
Device menu items
Logon / logoff
Calibration
User level
Configuration
Parameterization
Functional level
Device info
Service
Calibrate touchscreen
To navigate submenus menu items are opened by pressing the folder icons that are
marked with a plus sign. Expanded menu structures are marked with a minus sign and
can be closed by pressing the folder icon again.
Exit open windows with "Close" or "Exit". When you close an open window, the data is
automatically saved. Settings that have been changed in the submenus, apply.
Ä Chapter 9.1.1 'Passwords and user rights' on page 81.
Description
Users log in and out here. You can also change passwords.
Ä Chapter 10.1 'Login / logout' on page 108.
See
You can calibrate the sensor here. The current calibration and the calibration
logbook are displayed. See
At user level, the most important parameters for the respective measurement
and control channel are set.
Ä Chapter 10.3 'User level' on page 138.
See
In the configuration, additional functions can be selected that are not covered
by the user level. See
Set the date/time and control parameter sets and preset controller setpoints.
See Ä Chapter 10.5 'Parameter setting' on page 178.
Manual operation of specific functions for test and diagnostic purposes (i.e.
start wash contact or reset counter).
Ä Chapter 10.6 'Functional level' on page 181.
See
Information about hardware and software of the device, monitoring current
analogue and binary values of all device functions, inputs and outputs.
Ä Chapter 10.7 'Device info' on page 182.
See
View and reading of service data for diagnostic purposes, saving or loading a
default configuration. See
Calibration of the touchscreen to ensure reliability and comfort of the touch
operation. See
Ä Chapter 10.2 'Select calibration' on page 111.
Ä Chapter 10.4 'Configuration' on page 145.
Ä Chapter 10.8 'Service' on page 183.
Ä Chapter 10.9 'Calibrating the touchscreen' on page 183.
107
Device menu
417102269 Rev. 2-08.2020