Configuration; General - Ecolab Versatronic Instrucciones De Servicio

10.4

Configuration

Changes in the settings in the "Configuration" menu are only possible when
a user is logged on with the appropriate user rights.
With this device, "operator" and "Master" are given no user rights for the
configuration to the user levels. The sub-items in the configuration can
therefore being viewed but not be changed.
See
10.4.1

General

WARNING!
After each configuration change, the device restarts functions affected by
the changes. Analogue and digital outputs can accept unwanted conditions
during startup.
This means you can never make changes to settings while a machine is
running!
CAUTION!
Apart from faulty installation, incorrect settings on the instrument may also
affect the subsequent process in its proper function or cause damage.
You should therefore always provide generic safety equipment and only let
qualified personnel make changes to settings.
When making changes to configuration data for the data monitoring and
recording, recorder data is closed and a new recording section started.
Ä Chapter 9.1.1 'Passwords and user rights' on page 81.
145
Device menu
417102269 Rev. 2-08.2020