Donning The Prosthetic Glove; Applying/Removing The Terminal Device - Ottobock 8E70 Serie Instrucciones De Uso

6.3.2 Data transfer between the product and the PC
Product settings using the adjustment software can only be made via Bluetooth data transfer. For
this purpose, a Bluetooth wireless connection must be established between the product and the
PC using the B33061 Bluetooth adapter. To install the Bluetooth adapter for the first time, follow
the procedure described in the instructions for use for the "560X12=V* bebalance+" adjustment
software.
6.3.3 Preparing the product to connect to the adjustment software
In order to activate the Bluetooth function of the terminal device, carry out the following steps:
> The prosthesis is switched on.
► Hold the program switch on the back of the terminal device for at least 6 seconds until two
long beeps are heard.
→ The Bluetooth function of the terminal device is activated.

6.4 Donning the prosthetic glove

Wearing the bebionic hand with the prosthetic glove is recommended for daily use. The glove
protects the mechanism against environmental influences such as moisture, dirt and dust.
For information about the use (putting on and taking off) and care of the prosthetic glove, please
refer to the instructions for use included with the prosthetic glove.
7 Use

7.1 Applying/removing the terminal device

INFORMATION
Applying/removing the terminal device works only with the terminal devices "8E70=* bebionic
hand EQD" and "8E72=* bebionic hand Flex".
Separating the terminal device from the socket
CAUTION
Unintentional unlocking of the terminal device
Injury due to releasing the terminal device from the forearm (e.g. while carrying objects).
► When connecting the hand to the prosthetic socket or components, ensure that the connec­
tion is carried out correctly.
1) Turn the prosthesis off with the button in the charging receptacle (prosthetic socket) or the
switch on the elbow joint.
2) Rotate the terminal device once around its own axis until a slight resistance is felt (about
360°).
Donning mode for the terminal device must be
activated before pulling on the prosthetic glove
(see Page 51). Donning mode is ideal for put­
ting on clothes and jackets as this mode pre­
vents the thumb from getting caught in clothing
and therefore reduces breaking of the thumb.
49