Directives And Manufacturer's Declaration; Electromagnetic Environment - Ottobock 8E70 Serie Instrucciones De Uso

Beep signal
2x long
3x short
4x short
Long for
3 seconds

12.4 Directives and manufacturer's declaration

12.4.1 Electromagnetic environment

This product is designed for operation in the following electromagnetic environments:
• Operation in a professional healthcare facility (e.g. hospital, etc.)
• Operation in areas of home healthcare (e.g. use at home, use outdoors)
The customer or user of the product must ensure that it is operated in such an environment.
Observe the safety notices in the section "Information on proximity to certain areas" (see
Page 43).
The following tables outline the test levels of the tests to be carried out. The higher value applies if
there is a difference between the operating environments listed in the tables below.
Table 1 – Electromagnetic emissions for all devices and systems
Interference measurements
HF emissions according to
CISPR 11
HF emissions according to
CISPR 11
Harmonics according to
IEC 61000-3-2
Voltage fluctuations/flicker
according to IEC 61000-3-3
Vibration signal When
2x long
3x short
4x short
Long for
3 seconds
Compliance
Group 1
Class B
N/A
N/A
While pressing
the program
switch
After successful
data exchange
with the PC
After successful
data exchange
with the PC
During product
initialisation
Signal can be
deactivated
No
No
No
No
Electromagnetic environ­
ment directive
The product uses HF energy
exclusively for its internal func­
tioning. Its HF emissions are
therefore very low, and inter­
ference with neighbouring
electronic devices is unlikely.
The product is intended for
use in other than residential
facilities and in facilities con­
nected directly to a public low-
voltage network that also sup­
plies residential buildings.
Function
Bluetooth func­
tion is activated
The configuration
was transferred
from the terminal
device to the
adjustment soft­
ware
The configuration
was transferred
from the adjust­
ment software to
the terminal
device
Fault, the product
must be inspec­
ted by an author­
ised Ottobock
Service Centre.
59