Creating Video Links With Atem Streaming Bridge; Direct Connection - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

Creating Video Links with
ATEM Streaming Bridge
The ATEM Streaming Bridge allows you to decode the streaming video from any ATEM Mini Pro
and convert it back to SDI or HDMI video. It allows you to send video over your local network,
or to anywhere in the world via the internet.
You can connect ATEM Streaming Bridge in 3 different ways. One is to connect it direct to your
ATEM Mini Pro using a simple Ethernet cable, or you can connect it via your local network, or
you can use it anywhere in the world using the Internet.

Direct Connection

The simplest way to get ATEM Streaming Bridge operating is to plug it into an ATEM Mini Pro
with a simple Ethernet cable. The ATEM Mini Pro will see it and automatically send video to it
when you press the on air button.
Setting up a direct connection
1 Plug power into ATEM Streaming Bridge
2 Connect an Ethernet cable to the ATEM Streaming Bridge
3
Connect a television to the HDMI on ATEM Streaming Bridge.
4 Connect the other end of the Ethernet cable to ATEM Mini Pro
5 Press the On Air button on the ATEM Mini Pro.
Now you should see video appear on the HDMI television connected to
ATEM Streaming Bridge.

Creating Video Links with ATEM Streaming Bridge

113