Recording Iso Files On Atem Mini Pro Iso - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

Record button Click the record button marked 'rec' to start recording.
Stop button Click 'stop' to stop recording.
Display status Enable this feature by clicking the display status checkbox in the record options.
The display status will appear in ATEM Software Control at the bottom right side
of the user interface and shows the recording status. When recording, the record
indicator will illuminate red and displays the current drive and record time
remaining.
Record in This feature lets you set all Blackmagic Pocket Cinema Cameras to record when
all cameras you press the record button. This is helpful if you want isolated recordings from
each camera for editing later. Cameras will be automatically set to record using
Blackmagic RAW at the quality setting the camera was last set to.

Recording ISO Files on ATEM Mini Pro ISO

The ATEM Mini Pro ISO model can record video files from each of its video inputs, and these
are called isolated input files or "ISO" files.
By default, ATEM Mini Pro ISO will record a program file in exactly the same way as the ATEM
Mini Pro model. However if you select to record the ISO files, it will change to recording a whole
folder of content that includes the input video files as well as audio files, and a DaVinci Resolve
project file.
How to Record ISO Files
To record a folder of ISO files and other items, simply go to the record palette in ATEM Software
Control and select the setting "ISO record all inputs". Now ATEM Mini Pro ISO will record the
folder of contents when you press record in the palette or on the front panel.
To enable ISO recordings, check the 'ISO record all inputs'
checkbox in the record stream palette.
It's important to use a disk that's fast enough. A good flash disk is recommended as often
mechanical disks cannot work fast enough to record the 5 streams of H.264 HD video that you
will record with this setting.
ATEM Software Control 38