Connect Your Computer; Setting The Webcam Source - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

TIP While ATEM Mini will keep perfect audio and video synchronization, some
cameras you connect might have some video processing delay. This can cause the
audio on the ATEM Mini analog inputs to be slightly out of sync, because these
inputs are not delayed like the camera's video is. So you can select some audio delay
on the analog audio inputs to keep all your audio and video sources in perfect sync.
For more information, refer to the 'delay control' section in this manual.

Connect your Computer

Plug ATEM Mini's webcam output into your computer's USB input. Now your computer will
recognize ATEM Mini as a webcam so you can select it as the webcam source in your streaming
program, such as Skype or OBS Studio.
Plug your computer into ATEM Mini's webcam out USB-C connector
TIP When recording to disk using ATEM Mini Pro, the USB connector will be busy
recording to a disk so it won't be free to use as a webcam output. However the
ATEM Mini Pro model also has live streaming direct via its Ethernet connection. If you
want to use the USB connection to record to a disk you can use the Ethernet
connection for streaming. You can even use the Ethernet for external control using
ATEM Software Control. Please refer to the 'additional features on ATEM Mini Pro'
section for more information.

Setting the Webcam Source

In most cases, your streaming software will automatically set ATEM Mini as the webcam,
so when you launch your streaming software you will see the picture from your ATEM Mini
straight away. If your software doesn't select ATEM Mini, simply set the software to use
ATEM Mini as the webcam and microphone.
Below is an example of how to set the webcam settings on Skype.
1 In Skype's menu bar, open the 'audio and video settings'.
2 Click on the 'Camera' drop down menu and select Blackmagic Design from the list.
You will see the video from ATEM Mini appear in the preview window.
3 Now go to the 'microphone' drop down menu and select Blackmagic Design as your
audio source.
Getting Started 9