Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento página 34

Ocultar thumbs Ver también para ATEM Mini:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 679
The following processing palettes are available.
Palettes Tab
The 'palettes' tab contains the following processing controls.
Color Generators
Your ATEM switcher has two color matte generators which can be configured
from the color generators palette using a color picker or by setting hue,
saturation, and luminance levels.
Upstream Key
The switcher's upstream keyer can be configured from the upstream key
palette. Within the keyer palette, the keyer can be configured as a luma key,
chroma key, pattern key or DVE. The type of key available will also depend on
if the DVE is available. The upstream key palette will display all the parameters
that are available to configure the keyer. More information on how to use
upstream keyer is included later in this manual.
Transitions
The transitions palette is where you can configure the parameters of each
transition style. For example, for the dip transition the palette has a drop down
menu where you can select the dip source and for the wipe transition the
palette displays all the available wipe patterns. There are lots of variations
of transitions and a large number of transitions can be created by combining
settings and features in the transitions palette.
NOTE
It's worth noting that selecting a specific style of transition in this palette will
only adjust the settings for these transitions, and you still need to select the style of
transition you want to perform in the transition control section on the software or
ATEM Mini's control panel. The software and ATEM Mini's control panel work together
and mirror all settings, so you can use any combination you like!
Downstream Key
ATEM Mini has a downstream keyer which can be configured from the
downstream key palette. The palette has drop down boxes for selecting the
fill and key signals to the keyer, plus sliders to set the pre multiplied key clip
and gain values, and mask settings.
Fade to Black
The fade to black palette is where you can set the fade to black transition rate.
An 'Audio Follow Video' checkbox is also provided as a shortcut for the audio
mixer's master fader AFV button. Selecting this feature lets you fade your
audio with your fade to black.
ATEM Software Control
34

Publicidad

Tabla de contenido
loading

Tabla de contenido