Labels Settings; Hyperdeck Settings - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

Labels Settings

Label settings
The input labels settings let you customize the name of each input using a long and short name.
The short name will appear on the switcher input buttons on the software panel. The short
4 character name is used to identify the video input on the source names display. The longer
input names support up to 20 characters and are displayed in various dropdown source
selection boxes on the software control panel and on the ATEM advanced panel displays.
To change an input name, click in the text field, enter the text and click 'save'. The input name
will be updated on the software control panel and external hardware panel if one is connected.
It's a very good idea to change both the short and long labels at the same time, so they match.
For example Camera 1 would be entered in as a long label, and CAM1 as the short label.

HyperDeck Settings

HyperDeck settings
You can connect up to 4 Blackmagic HyperDeck Studio disk recorders to a network via
Ethernet and control them using ATEM Software Control. When connecting HyperDecks, use
these settings to configure the IP Address, select the inputs your HyperDecks are connected
to, turn the auto roll feature for each deck on or off, and set their frame offset settings so they
can switch cleanly.
Changing Switcher Settings 78