Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento página 116

Now you can see information such as the ATEM Streaming Bridge name and the network
settings. If you are connecting via the local network, then most of the time you can select
DHCP. This will let your ATEM Streaming Bridge find its network address on the network
automatically and this is how most people connect their computers to a local network.
With DHCP the network itself will take care of the correct network settings for anything
connected to it. It's the easiest way to connect.
However if you have a network administrator, it's possible your network might have custom
IP addresses for all the equipment connected to it. It's best to check with your network
administrator if they are managing your computers and network in your company.
Now you have the ATEM Streaming Bridge set to DHCP, try looking at the platform menu on the
ATEM Mini Pro again to see if the ATEM Streaming Bridge has appeared in the list. The
ATEM Mini Pro should automatically see the ATEM Streaming Bridge on your network.
Changing the ATEM Streaming Bridge name
While you are using the ATEM Setup, it's a good idea to give your ATEM Streaming Bridge a
custom name. If you are using it on a projector in a public space in your building, perhaps call it
"Main Projector" or if you are using it for a large television in a conference room, perhaps call it
"Conference Room 3" or similar. This means when you have more than one ATEM Streaming
Bridge, you can tell which one is which.
Setting a streaming key
Because anyone can stream to any ATEM Streaming Bridge in the menu, it might be a good
idea to set a streaming key to stop anyone crashing into your video link! It's so easy to select
any ATEM Streaming Bridge on your network, that it could become chaos of everyone
streaming over the top of everyone else.
This is not an issue as you can set a streaming key. This is a password that stops anyone from
accessing your ATEM Streaming Bridge. While running the ATEM Setup, you can see the
streaming key text entry field. Simply type in a password here, and then only ATEM Mini Pros
that have the same streaming key in their streaming settings will be allowed to connect to this
ATEM Streaming Bridge.
You can set a password of your choice, but there is also a password generator button in the
ATEM Setup so you can ask the computer to generate a good secure password. You can just
copy and paste this password to who you want to connect to you. Once they enter it into their
ATEM Mini Pro, only they will have permission to connect to this ATEM Streaming Bridge.
Clicking the generate key button will automatically generate a password for your stream
Creating Video Links with ATEM Streaming Bridge 116