Network Connection - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

Network Connection

You can also connect ATEM Streaming Bridge to your network and place it anywhere in your
building. This can be useful when you want to live stream to a conference room, or a video
projector. As there might be more than one ATEM Streaming Bridge on your network, the main
difference is you will need to select the ATEM Streaming Bridge in your ATEM Mini Pro network
settings. This will ensure your ATEM Mini Pro knows what streaming bridge it needs to send its
video data to.
Setting up a network connection
1 Plug power into ATEM Streaming Bridge
2 Connect the ATEM Streaming Bridge Ethernet to your network.
3 Connect a television to the HDMI on ATEM Streaming Bridge.
4 Ensure your ATEM Mini Pro is connected to the same Ethernet network.
5 Connect ATEM Software Control to control your ATEM Mini Pro.
6 Open the streaming palette and click the platform menu.
7 Confirm the ATEM Streaming Bridge is listed in the menu.
8 Select the ATEM Streaming Bridge in the platform menu.
9 Press On Air button on the ATEM Mini Pro.
Now you should see video appearing on the HDMI Television.
Network Status Indicators
There are 4 lights on the ATEM Streaming Bridge that provide information on the state of the
network connection. The 2 LEDs on the Ethernet connector will show the state of the
connection itself. The right orange LED indicates the network is up and connected ok.
Creating Video Links with ATEM Streaming Bridge 114