Remote Atem Mini Pro - Blackmagic Design ATEM Mini Manual De Instalación Y Funcionamiento

This settings file is what you will send to the remote ATEM Mini Pro and it has all the settings
contained in it so the remote ATEM Mini Pro knows where to find this ATEM Streaming Bridge.
It's worth noting that this file is a very similar kind of XML file used on ATEM Mini Pro for its
streaming services. More technically qualified people can even open and make changes to this
file if you have a unique or custom setup.
The name you give the service will be the name listed in the platform menu in the remote
ATEM Mini Pro streaming settings. The quality setting will set the remote quality setting in the
ATEM Mini Pro.

Remote ATEM Mini Pro

Now you have this settings file and have emailed it to the person using the remote ATEM Mini
Pro, there is a few things they need to do. These steps are quite simple, so it should be very
easy for the remote ATEM Mini Pro studio to get these settings loaded.
All the remote studio needs to do is go to the ATEM Software Control and select load streaming
settings in the stream menu at the top of their screen.
Once loaded, a new service will be added to the platform menu in the streaming settings.
They just need to select this menu and press on air to start streaming.
Select the ATEM Streaming Bridge from the platform
menu in ATEM Software Control's live stream palette
Creating Video Links with ATEM Streaming Bridge 120