Description Of The Serving Trolleys; Technical Data - Hupfer SW Manual Del Usuario

Section 3
Page 14
3.4.2

Description of the Serving Trolleys

The Serving Trolleys are made of robust stainless steel. They consist of two round tube push bars or a
closed round tube push frame with welded-in shelves in between.
Each shelf has a large, easy-to-clean radius and is lower than the profile edge. The shelves are bevelled on
all sides, are slightly crimped towards the inside for safety purposes, and are equipped with a sound absorb-
ing undercoating.
Four disc bumpers installed directly above the swivel casters protect from damage. The disc bumpers are
made of elastic and shock resistant plastic and can easily be replaced.
All Serving Trolleys are equipped with corrosion-proof and maintenance-free swivel casters of which those at
the front are additionally equipped with total locks. The Serving Trolleys may also be equipped with two
swivel and fixed casters as an option.
The Serving Trolleys from the SW ERGO range are additionally equipped with a lateral push handle at the
front, which is located at an ergonomically beneficial height and allows optimal handling without physical
strain. Due to its height, the gripping position can be changed from horizontal to vertical in order to prevent
the typical effects of forced postures. In addition, the upper shelf is reinforced with a support frame consisting
of three braces permitting higher permanent surface loads.
The Serving Trolleys from the SSW range are characterised by their great loading capacity. The closed
round tube push frame is additionally reinforced with welded-in traverses. Even with maximum loads, uneven
terrains such as thresholds can easily be passed with the appliance.
The Serving Trolleys from the SSW ERGO range share their design with the SSW and are additionally
equipped with a lateral push handle at the front, which is located at an ergonomically beneficial height and
allows optimal handling without physical strain. Due to its height, the gripping position can be changed from
horizontal to vertical in order to prevent the typical effects of forced postures. In addition, the upper shelf is
reinforced with a support frame consisting of three braces permitting higher permanent surface loads.
In addition, the SSW Ergo features a fifth fixed caster which is mounted in the middle and permits fast and
easy shunting in the narrowest of spaces. Due to the large wheel diameter, the pulling force required re-
mains low – even at maximum load. SSW ERGO Serving Trolleys can always be manoeuvred in the optimal
way, regardless of the physical strength of the operating staff.
3.4.3

Technical Data

SW Standard Serving Trolley
width
Depth
Height
Tare weight
Payload
Number of shelves
Shelf dimensions
Surface load per
shelf
Serving Trolley
SW | SW ERGO | SSW | SSW ERGO | MSW | MSSW
Dim. SW 6x4/2 SW 6x4/3
in 27.4 27.4
(mm) (695) (695)
in 19.5 19.5
(mm) (495) (495)
in 35.1 35.1
(mm) (892) (892)
lbs 24.3 26.5
(kg) (11) (12)
lbs 176.4 264.6
(kg) (80) (120)
2 3
in 23. 6 x 15.7 23. 6 x 15.7
(mm) (600 x 400) (600 x 400)
lbs 88.2 88.2
(kg) (40) (40)
Description and Technical Data
Serving Trolleys for Large-Scale Kitchens
SW 8x5/2 SW 8x5/3
35.2 35.2
(895) (895)
23.4 23.4
(595) (595)
37.8 37.8
(960) (960)
30.9 39.2
(14) (17, 8)
176.4 264.6
(80) (120)
2 3
31. 5 x 19. 7 31. 5 x 19. 7
(800 x 500) (800 x 500)
88.2 88.2
(40) (40)
SW 8x5/4
35.2
(895)
23.4
(595)
50.2
(1275)
52.5
(23,8)
330.7
(150)
4
31. 5 x 19. 7
(800 x 500)
88.2
(40)
91337781_A0